[Misc] MX5111 procedure to enter service mode

[CCC Repair]

I have a sharp MX 5111 that I need to enter the service mode and it just has the home key so I'm not sure how to enter into it. Any ideas? Thanks

[Phil B.]

Re: MX5111 procedure to enter service mode

I have a sharp MX 5111 that I need to enter the service mode and it just has the home key so I'm not sure how to enter into it. Any ideas? Thanks

no manual for it?

[JLSam]

Re: MX5111 procedure to enter service mode

To get the numeric pad you:

Press Home key x2
Then click the firmware #.

You'll know what to do afterward.

Sent from my ONEPLUS A3000 using Tapatalk