sharp ar bc260 Controller default password

[nmfaxman]

Customer got this machine donated to them and asked me to help set it up.
I can get it to print but need to access the web monitor.
I tried all the basic passwords and user IDs.
Is there anyway to reset it without reinstalling software?

I also need info on the scanning.
I know it is licenced, but is there a way to change the licence to the new location?

Thanks for any info.

[ZOOTECH]

If you tried the password Sharp, and it didn't get you in, you can try to reset the NIC in the key operator programs.
The location of the machine shouldn't have any bearing on the license. The product key is what unlocks the scanning.
(I can't remember now if this model came defaulted with one Sharpdesk License or not.)
If by pressing Image Send you get a window that says Option not installed, you would need to purchase network scanning.

[mtech]

If I remember right, the default web username and password should be:
USERNAME: admin
PASSWORD: Sharp (use an upper case S)

[nmfaxman]

If I reset the NIC, won't I loose scanning?

[DavePo]

No you won't loose scanning. That info is stored elsewhere.