sharp ar-5316 "L3 code"

[aRsen_lupEn]

Hello
my problem is "l3-00 code" home sensor changed but problem is continue
Someone help me??
"sory bad speak english"

[vale24]

scanner move problem

L3 00 Content Scanner return trouble
The scanner does not complete returning in the specified time.The mirror is not in the home position when OC copying is started with the mirror standby in the home position.
Cause - Mirror unit abnormality Scanner wire disconnectionOrigin detection sensor abnormality Mirror motor harness abnormality
Check and remedy Use SIM 1-1 to check the mirror reciprocating
operations. When the mirror does not return. Check for disconnection of the scanner wire. Check the harness and the connector between
the mirror motor and the MCU PWB.
Replace the mirror unit.
Replace the MCU PWB.
When the mirror does feed.
Use SIM 1-2 to check the mirror home position
sensor.

[aRsen_lupEn]

L3 00 Content Scanner return trouble
The scanner does not complete returning in the specified time.The mirror is not in the home position when OC copying is started with the mirror standby in the home position.
Cause - Mirror unit abnormality Scanner wire disconnectionOrigin detection sensor abnormality Mirror motor harness abnormality
Check and remedy Use SIM 1-1 to check the mirror reciprocating
operations. When the mirror does not return. Check for disconnection of the scanner wire. Check the harness and the connector between
the mirror motor and the MCU PWB.
Replace the mirror unit.
Replace the MCU PWB.
When the mirror does feed.
Use SIM 1-2 to check the mirror home position
sensor.

thank you very much