MX3070 reset counter to 0

[Maxx]

Hi did somebody knows how to reset counters to 0 on this model?
Thanks a lot

[dsmith46]

Re: MX3070 reset counter to 0

Which counters do you speak of? All of the maint counters can be found in Sim 24-4, while developer counters will be found in Sim 24-5, but they reset themselves when new developer is installed and Sim 25-2 is ran.

[Maxx]

Re: MX3070 reset counter to 0

no,Total copy count. Ex :Reset demo unit or showroom unit to 0 tota copy counter after tests
Before it was cpap or sim24-6

[dsmith46]

Re: MX3070 reset counter to 0

As far as I know there isn't a way to do that. For one, it morally isn't right, and two, can be illegal. Just my two cents.

[Phil B.]

Re: MX3070 reset counter to 0

no,Total copy count. Ex :Reset demo unit or showroom unit to 0 total copy counter after tests
Before it was cpap or sim24-6

don't know about Canada but try that crap in the States... someone would be going to jail.

[xring1958]

Re: MX3070 reset counter to 0

This sounds like a question I get regularly from sales people.

[ridgemill]

Re: MX3070 reset counter to 0

Just take the old meters as zero, replace all PM parts, and call it a day.

[Luke123]

Re: MX3070 reset counter to 0

Just take the old meters as zero, replace all PM parts, and call it a day.

Sharp has removed 24-6, because resetting the meter to zero is the same as resetting your odometer to zero in your car. This is a bad idea to do. I do know a way to do it, but I can not tell you, ans wont

[Phil B.]

Re: MX3070 reset counter to 0

Sharp has removed 24-6, because resetting the meter to zero is the same as resetting your odometer to zero in your car. This is a bad idea to do. I do know a way to do it, but I can not tell you, ans wont

people don't care about right or wrong anymore... it's only them and how to make a $...no matter who gets screwed in the end. People like this need to find another line of work, and stop putting black marks on us good folk.