MX3140 running slow

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Leebs14
    Trusted Tech

    250+ Posts
    • Feb 2014
    • 457
    #1

    MX3140 running slow

    Tags: finisher, fn10, mx3140, slower
    • harleyrider
      Trusted Tech

      250+ Posts
      • Oct 2011
      • 348
      #2
      Re: MX3140 running slow

      The only thing I can think is maybe firmware. Check the version on both finishers and see if they are the same?

        Comment

        • igi
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1507
          #3
          Re: MX3140 running slow

          Hi check output of paper face up or down. offset after each print?

          good luck

            Comment

            • ridgemill
              Trusted Tech

              100+ Posts
              • Sep 2017
              • 172
              #4
              Re: MX3140 running slow

              Slow printing can also be caused by the job log becoming full.

                Comment

                Previous template Next
                Working...