Sharp ar-M208N error

[Guest]

When I my Sharp AR-M208N shows me this messege: H2-00.
What that meens?
Thanks.

[ZOOTECH]

H2-00 is an open thermistor or harness. It might also be a false error, in which case you could clear the code with TC 14.

[kalmax]

What is the "TC 14"?
THank you

[vale24]

that is the problem

Content: Thermistor open
Detail: The thermistor is open.
The fusing unit is not installed.
Cause: Thermistor abnormality
Control PWB abnormality
Fusing section connector disconnection
The fusing unit is not installed.
Check and remedy: Check the harness and the connector between
the thermistor and the PWB.
Use SIM 14 to clear the self diagnostic display. (Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.))