[Misc] 5% Crop Codes

[MattL]

I saw a thread recently with regards to this but cannot find it.

I have many Sharp machines reporting fine with 5% settings but struggling to get a work combination for the MX-C250/C300 machines, Sharp apparently say it can be done but we cannot get it work.

Anyone out there got their machines of this type to report at 5% for toner levels?

[boutn]

Re: 5% Crop Codes

I saw a thread recently with regards to this but cannot find it.

I have many Sharp machines reporting fine with 5% settings but struggling to get a work combination for the MX-C250/C300 machines, Sharp apparently say it can be done but we cannot get it work.

Anyone out there got their machines of this type to report at 5% for toner levels?

On the machine itself or via SNMP?

[MattL]

Re: 5% Crop Codes

Via SNMP.

This afternoon been given some to test but as your cannot VNC on to them its going to be a few days before I can get to a machine to test to see if they actually work.

[boutn]

Re: 5% Crop Codes

Via SNMP.

This afternoon been given some to test but as your cannot VNC on to them its going to be a few days before I can get to a machine to test to see if they actually work.

should be SIM 55-3 - switch 32 set bit 2 to 1

[MattL]

Re: 5% Crop Codes

That was the missing bit I didn't have.

Also 26-69
A = 1
B = 0
F = 1

A-F are actually numbered i.e. 1-6 so A=1, B=2, F=6