We have Error E7-11 on MX1800.
I know its an ancient machine, but the client wants it fixed...
changed the CCD and the copylamp, no luck.
Im guessing its the SCU board, but we dont have a MX1800 for spare parts, and its an expensive board.
Are there any tests we can do to make sure the board is the problem?
I know its an ancient machine, but the client wants it fixed...
changed the CCD and the copylamp, no luck.
Im guessing its the SCU board, but we dont have a MX1800 for spare parts, and its an expensive board.
Are there any tests we can do to make sure the board is the problem?
Comment