Could you help me this trouble abt Sharp AR-F281?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ifback
    Technician

    50+ Posts
    • Feb 2006
    • 52

    #1

    Could you help me this trouble abt Sharp AR-F281?

    hi, everybody.

    i had a trouble abt this machine Sharp AR-F281.

    it has error E7-01.

    I dont know abt this error.and first time i met this machine.so i dont know.

    Plz help me.

    Thank a lot.

    --------------------
    Welcome to VIet NAm.....
  • MHeon71
    Trusted Tech

    Site Contributor
    250+ Posts
    • Oct 2008
    • 489

    #2
    I have never heard of a AR-F281. But in other copiers, the E7-01 one code may mean you have a HDD problem.

    Comment

    • ifback
      Technician

      50+ Posts
      • Feb 2006
      • 52

      #3
      Originally posted by MHeon71
      I have never heard of a AR-F281. But in other copiers, the E7-01 one code may mean you have a HDD problem.
      Thank, MHeon71.
      Let me check.

      someone else.help me plz

      Comment

      • ZOOTECH
        Senior member of CRS

        Site Contributor
        2,500+ Posts
        • Jul 2007
        • 3375

        #4
        If this is similar to the ARF151, the E7-01 is a memory allocation for duplex error. Try re-seating all connections, especially memory pwbs. See if TC 26-39 (memory capacity setup)is set to a '3' for 6MB.
        "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • gordie
          Technician

          50+ Posts
          • May 2008
          • 83

          #5
          Hi
          On an AR281 Trouble code list.
          E7-01 Image data memory trouble

          I cannot help any further as I have not had this fault

          Gordie
          sigpic

          Comment

          • csdomingo

            #6
            E7-01 means image data memory trouble.
            The ICU PWB SIMM is either not installed, not installed properly or is not working. Check the installation of ICU PWB SIMM or check the capacity of the SIMM with simulation 22-10. The value should be more than 8MB, or replace the ICU PWB SIMM.

            Comment

            • ifback
              Technician

              50+ Posts
              • Feb 2006
              • 52

              #7
              thank everybody.let me check

              Comment

              Working...