There is a tech tip on Sharp's website regarding this error code. It says it is a damaged harness but it does not mention the part number. I think I have it narrowed down to 3 part numbers. Does anyone know what the part number is. It is to a MX-PNX1B.
-
-
The TB you quote is for the AR PNX1 A/B/C/D. This is for the punch unit in the booklet finisher. The part #s for the harnesses are:
OCW1020K375// ASM I/F Harness or
OCW1020K374// ASM Power Harness -
Sorry for the late reply. I called Sharp and the said it was a misprint and that it is fo the MXPNX1B. They told me the harness 0CW1035K219// fixes the problem 99% of the time and I guess I am the 1% because it did not work. They are now having me replace the punch PWB and motor.Comment
-
I have installed the punch PWB and punch motor and it works. Make sure you change the dip switches on the PWB. It will be a 2 hole punch if you do not change them. 1-on 2-off = 3 hole punch. Thanks for your help.Comment
Comment