[Misc] Stripes on first few prints only

[Narrows]

Hello,
This my first time posting on here, but this is a great forum to find knowledge.

So,
I have a MX3070n that prints yellow strips on the first couple prints in the morning then stops. After these first few pages it snaps out of it and prints normal.

Now to add to the weirdness it has also done it with cyan at least once.

I've never been able to duplicate this at the machine. Any suggestions on here to start would be appreciated.

Thanks,

[JParker]

Re: Stripes on first few prints only

Hey there! To start, how many clicks does your 3070 have/ what are the consumable counters at? With this CQ problem I'd look at your drums and Primary Transfer belt first. Switch that yellow drum with another color and see if the problem continues, if so it's your drum. If not, take a closer look at the transfer belt cleaning assembly.

[Dewald]

Re: Stripes on first few prints only

Hi has this problem been sorted and if so what was the fix.

[Dewald]

Re: Stripes on first few prints only

Hi I have the same problem, any ideas will apreciate it. Please find attached file.After a few prints its fine then next morning same thing.

[tmw]

Re: Stripes on first few prints only

Looks possibly like dirty coronas, transfer belt isn't cleaning properly, or both. Or possibly bad drum blades.