Anyone have a theory as to why on these machines that the 22-6 looks faint compared to other models? 50-10s are very light but copies and prints look good. Im stumped. Just want to see of anyone else has experienced this.
-
Are you the police? "No ma'am, were musicians" -
Re: 2310-3110 faint 22-6's and 50-10s
1) of course
2) 500k on black 80k on color
3) yes always.
4) Just rebuilt it myself. 4 oem drums and mk's. Im a 30 yr experienced tech that has done hundreds of PM's
5) seems all of these series do this. 50-10's are barely visible 22-6s are light too
6) 44-2, 50-22 44-27, 26 and 6 done 46-74 too.Are you the police? "No ma'am, were musicians"Comment
-
Re: 2310-3110 faint 22-6's and 50-10s
It might sound silly but check eco settings in key op mode to ensure toner save is not enabled. Also in sim 26. I had a MX5000 ages ago that printed a calibration sheet fine but then everything else was washed out, and this was the cause. Some idiot IT guy turned it on then logged a call due to feint prints but didn't mention that he had changed the setting
Comment
-
Re: 2310-3110 faint 22-6's and 50-10s
It was one of the 1st things I checked. Just seems this series does that..light 22-6's and 50-10's. Copies and prints are greatAre you the police? "No ma'am, were musicians"Comment
Comment