Hi
FIRST TIME Ive worked on this model so Im as usual far from an expert,
On the glass everything is fine, I couldnt find much info on the MX 3070 MODEL
When using the Document feeded 8.5 X 11R and 8.5 X 14 Detect ok in the ADF tray
When using the 8.5 X 11 and 11X 17 they ARE NOT registering correctly(just says either 14 inch or 11 inch Reduction way)
I suspect it has something to do with the Width detection PWB
I purchased 2 manuals onlineyesterday in order to get the part number and am having a very difficult time
finding correct part,I even tried to get the tray unit part number and that was very challengeing.The Part numbers i came up swith
come back with no search results
These were the ones I found thru searching for qwuite a while.
Width sensor PWB(CPWBF1594FCE1 +CPWBF2193FCE1)
AND for tray unit
CSOU-0235DS56
PLEASE HELP IF YOU ARE ABLE TO
THANK YOU
ANDY
FIRST TIME Ive worked on this model so Im as usual far from an expert,
On the glass everything is fine, I couldnt find much info on the MX 3070 MODEL
When using the Document feeded 8.5 X 11R and 8.5 X 14 Detect ok in the ADF tray
When using the 8.5 X 11 and 11X 17 they ARE NOT registering correctly(just says either 14 inch or 11 inch Reduction way)
I suspect it has something to do with the Width detection PWB
I purchased 2 manuals onlineyesterday in order to get the part number and am having a very difficult time
finding correct part,I even tried to get the tray unit part number and that was very challengeing.The Part numbers i came up swith
come back with no search results
These were the ones I found thru searching for qwuite a while.
Width sensor PWB(CPWBF1594FCE1 +CPWBF2193FCE1)
AND for tray unit
CSOU-0235DS56
PLEASE HELP IF YOU ARE ABLE TO
THANK YOU
ANDY
Comment