[Misc] Sharp MX-2600n Black Streaking and Mirroring issues

[Kaluminatie]

I have tried everything I can to fix this issue and can't seem to get to the bottom of it..

I have upgraded to newest firmware
New developer/toner
Cleaned optics
Calibrated with jig
New transfer belt/blade/ptc
Tried with bypass tray

It does this on regular prints, I don't do any scan to print. I send prints from my computer.

I included the pictures of the issue. I need immediate help PLEASE!!!

color 1.jpgcolor 2.jpgcolor 3.jpgcolor 4.jpg

[tedtech]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

Black drum/MK. Bad blade cleaning.

[Yousaidnigeria]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

I have tried everything I can to fix this issue and can't seem to get to the bottom of it..

I have upgraded to newest firmware
New developer/toner
Cleaned optics
Calibrated with jig
New transfer belt/blade/ptc
Tried with bypass tray

It does this on regular prints, I don't do any scan to print. I send prints from my computer.

I included the pictures of the issue. I need immediate help PLEASE!!!

[ATTACH=CONFIG]46975[/ATTACH][ATTACH=CONFIG]46976[/ATTACH][ATTACH=CONFIG]46977[/ATTACH][ATTACH=CONFIG]46978[/ATTACH]

Clean or change the drum cleaning blade for the black (k) drum unit. It should solve the problem

[bmwmick]

[OlliK1969]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

Hi

How old are the cleaning blade?
If there yellow or brown, put new in

[Hansen88]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

Are you using generic toner?

[Kaluminatie]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

I use Sharp OEM toner always. New blades, they have been replaced a couple weeks ago. I ordered a new drum unit. hopefully that works. I've been at this for weeks!!

[moose55]

Re: Sharp MX-2600n Black Streaking and Mirroring issues

I concur with everyone else. Swap the K drum with another. Does the problem follow the PCU? Possibly a fuser, but this is the PCU 95% of the time.