Re: MX-3110N Faded Prints, Copies Good
Your problem is fixed with your copier, thanks to all the contributors and trained techs who took the time to help you, including mansart. I hope when you get your finances unfrozen, you show your appreciation by contributing to the site like you said you would.
MX-3110N Faded Prints, Copies Good
Collapse
X
-
Re: MX-3110N Faded Prints, Copies Good
As stated in the other thread this forum accepts cc through PayPal as the merchant processor. My PayPal accounts and all associated credit cards/bank accounts are flagged by PayPal and will not allow the charge. I have offered to pay the individual who solved the issue in other means which he declined. I am sending him some of the product I make as a thank you though
Further more if I was trying to welch on my deal why would I have made a post asking for assistance in contributing or offered to may the individual in other forms
Here's what you do. Go to Walmart and get a Greendot money card. Put some money on it and then you can use it. Problem solved.Leave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
As stated in the other thread this forum accepts cc through PayPal as the merchant processor. My PayPal accounts and all associated credit cards/bank accounts are flagged by PayPal and will not allow the charge. I have offered to pay the individual who solved the issue in other means which he declined. I am sending him some of the product I make as a thank you though
Further more if I was trying to welch on my deal why would I have made a post asking for assistance in contributing or offered to may the individual in other formsLeave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
No they have froze my PayPal account(s). Since my credit cards and bank accounts are linked to a frozen account, when using PayPal checkout (even without logging in) they associate the credit card with my frozen account and do not allow the charge.Leave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
I read the other thread. You said Paypal froze all of your credit cards. Dude, they don't have the power to do that. That would be against the law.Leave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
Then why did you offer too make a donation? This site accepts credit cards as well. Your issue is resolved...now you have a case of "alligator arms."Leave a comment:
-
-
-
Re: MX-3110N Faded Prints, Copies Good
Donate to the site.....
Beating another copier into submission is reward enough for me....Leave a comment:
-
-
Re: MX-3110N Faded Prints, Copies Good
mansart got be up and running again
He came to the conclusion that the problem was isolated to the MFP board. He went above and beyond finding sources for replacements/repair
BUT
He also insisted that I try a known good SD card file that he sent me before dumping money into parts
I am glad I listened becuase I am back up and running and printing like its new again.
Everyones help here is greatly appreciated. I obviosly could not have done it without youLeave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
We had something similar to this on a mono Sharp and tried just about everything. Sharp advised us to replace the SD card and HDD as a set. Do not use a copy of the SD card that is installed in it now. Either use a new Sharp provided SD card or get a copy from someone and write it to a new Sandisk. This took care of the problem for us.Leave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
SIM 64-1
set the following
A:1
B:100
C:200
Select C M Y in bottom left of touch screen, and Execute
As near as I can determine this should print a grid pattern, one for each color.
If these colors look good then you have a MFP board problem. This print pattern is generated directly from the LSU control board
C execute yields cyan grid
M, Y individually each yield a corresponding grid
All grids appear to be bright and full colorLeave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
SIM 64-1
set the following
A:1
B:100
C:200
Select C M Y in bottom left of touch screen, and Execute
As near as I can determine this should print a grid pattern, one for each color.
If these colors look good then you have a MFP board problem. This print pattern is generated directly from the LSU control boardLeave a comment:
-
Re: MX-3110N Faded Prints, Copies Good
Can I offer a reward????
I'd be willing to offer a reward to any individual that can solve this issue, as well as a contribution to the site. Is that allowed??Leave a comment:
Leave a comment: