I have a customer Sharp AL-1651 copier that will print the first page, but then displays the 'add paper to the paper tray' (both tray 1 and tray 2) but works OK using the manual feed tray. I place a page on the flat bed scanner, request 3 copies, first copy prints, then displays "Add paper to paper tray".. I open the tray and reset it and press Start and the second copy prints, then the "Add paper to paper tray" again displays.. I checked both the Registration Clutch and Paper Feed relays and both are working.. Both trays are clean and show no broken parts.. I have cleaned all the pickup and registration rollers.. What should I look at next???
Comment