Good afternoon everyone
I am getting Error L4-18 on a MX 3071,
I did not notice anything wrong with the drum units and all the connectors seem to be ok.
After I reset the error the machine starts to briefly warm up and goes right back into the
L4-18 error, The customer said it happened right after changing magenta toner.
It is the only MX 3071 I have ever worked on.
Thank you for all your past and future help. Obviously at this point IM dying a copier tech(approaching 45 years of copier stress)
Thank you all again'
Andy
I am getting Error L4-18 on a MX 3071,
I did not notice anything wrong with the drum units and all the connectors seem to be ok.
After I reset the error the machine starts to briefly warm up and goes right back into the
L4-18 error, The customer said it happened right after changing magenta toner.
It is the only MX 3071 I have ever worked on.
Thank you for all your past and future help. Obviously at this point IM dying a copier tech(approaching 45 years of copier stress)
Thank you all again'
Andy
Comment