Sharp MX4071 / hold address after scan...

[mansart]

I have a client who wishes to
1. select a scan address
2. scan document
3. have machine retain address and send next document

Without having to re-select address or using "recent job" dialogue box.


I find reference to soft switch 55-3

Switch 30-3 set to 1, however I have tried this and does not work,

Anyone had any sucess with this?

TIA

[ZOOTECH]

Re: Sharp MX4071 / hold address after scan...

I have a client who wishes to
1. select a scan address
2. scan document
3. have machine retain address and send next document

Without having to re-select address or using "recent job" dialogue box.


I find reference to soft switch 55-3

Switch 30-3 set to 1, however I have tried this and does not work,

Anyone had any sucess with this?

TIA

Is ‘Job Build’ available for that function?
Never mind, I just had a brain fart.

[mojorolla]

Re: Sharp MX4071 / hold address after scan...

Had this a few years back. There is a setting in the webpage; the actual verbiage is something like "Hold settings for a little while".....
Capture.jpg
well, I was close.....

[mansart]

[mloudy]

Re: Sharp MX4071 / hold address after scan...

I am certain this is one of those secret soft switch settings. I will see if I can find it when I get to work in the morning. I will send you the entire list.

[mansart]

[Prints Charming]

Hold Settings Hold Address.JPG

[mansart]

Re: Sharp MX4071 / hold address after scan...

Thank you. Should have thought of that.


Sent from my iPhone using Tapatalk

[leo34staffs]

Re: Sharp MX4071 / hold address after scan...

[ATTACH=CONFIG]54445[/ATTACH]

Thanks for that, can you send me a list of soft switches? , i have some from the handy guides, but may be some new ones of good use.