BP-70C55

[MattL]

Anyone got any of these out in the wild?

I am UK based and they are proving to have a few issues just wondered if it was me or the machine in general?

Copier its self is ok just around PaperCut and card readers.

[Prints Charming]

Re: BP-70C55

Get the device Firmware up to Version 0250Q100 and PaperCut up to Version 22.0.6 (as a minimum) and it'll be good.
It resolves the OSA6 and Card Reader Emulation problem.

[MattL]

Re: BP-70C55

I had machines on version 2 so upgraded them to 25 version, PaperCut is on 22.0.7 and still have issues.

Mainly around associating new cards, unable to resturn to main screen without rebooting, if I set an identity number as login and enable the 10 key pin bad touch the first and it goes, ok with full qwerty one. I've tried to registered the card reader to the machine but no joy as directed by the bulletins (also card reader is supported).

[Chamonik]

Re: BP-70C55

Hello!

I have tested it with car reader (mifare) and JobAccounting and seems to work perfectly.

[ayeright]

Re: BP-70C55

Not sure if it helps but Sharp released a bulletin a few days ago discontinuing the old L80CR80581 card reader and announcing a replacement (L80CR80531BKU).

[MattL]

Re: BP-70C55

Can you share that bulletin, could impact the rest of the machine replacement based on that.

[ayeright]

[MattL]

Re: BP-70C55

Ah so its not a case of they are not working but just end of life.