E7-29 Error Code
Good afternoon everyone,
I'm currently working on a MXM654N that is giving me an E7-29 error code. I was originally called out for an L6-10 error code which I was able to fix by switching out the full LSU unit from a machine I had back at the office but when the machine was turned back on it started to give me the E7-29 error code.
I then replaced the the MFPC pwb (again from the machine from the office) and was still receiving the E7-29 error code. I have spoken with Sharp Tech Support and they recommended that I order the LSU CNT PWB but before I do I just wanted to get on here to see if anyone has seen anything like this before or if I'm overlooking something that could fix this problem.
Thank you for your help!
I'm currently working on a MXM654N that is giving me an E7-29 error code. I was originally called out for an L6-10 error code which I was able to fix by switching out the full LSU unit from a machine I had back at the office but when the machine was turned back on it started to give me the E7-29 error code.
I then replaced the the MFPC pwb (again from the machine from the office) and was still receiving the E7-29 error code. I have spoken with Sharp Tech Support and they recommended that I order the LSU CNT PWB but before I do I just wanted to get on here to see if anyone has seen anything like this before or if I'm overlooking something that could fix this problem.
Thank you for your help!
Comment