[Misc] No OSA in MX-3070

[nobody-here]

Hello

I have a MX-3070 Everything is working fine but OSA.
If I enable Trial Mode, it works. With Trial Disable no OSA appearing.

This is also checked in 22-6 SIM

Any guess to enable full OSA again in this Machine?
Thanks

[Prints Charming]

Re: No OSA in MX-3070

Some regions did not have the OSA Kits installed as standard on the CR4 series. On CR4.5 series they are pretty much standard install everywhere. If your device only shows OSA when Trial Mode is on, you're going to need the MXAMX2 or MXAMX3 Product Keys to properly enable this function, depending on which option you want.

[nobody-here]

Re: No OSA in MX-3070

Some regions did not have the OSA Kits installed as standard on the CR4 series. On CR4.5 series they are pretty much standard install everywhere. If your device only shows OSA when Trial Mode is on, you're going to need the MXAMX2 or MXAMX3 Product Keys to properly enable this function, depending on which option you want.

Hello Thank you for you reply

Here in Italy, MX3070 usually come along with MXAMX2 and 3, and there was in this machine that was working with papercut.
In this machine we had PCUPWB repaired, BTW the EEprom and Flashes are those original. After reparing, MXAMX2 and 3 is missing.

Is there any way to get them back?

[Craigcul]

Re: No OSA in MX-3070

Hi check that the destination of the machine is set correctly as some destinations do not have osa as standard it is an option crop code 26-6


Sent from my iPad using Tapatalk