Sharp Mx4071 slow to boot and run

[nanohitmen]

Re: Sharp Mx4071 slow to boot and run

that tool is ass, try this one Ic/cpu Rom Smd Chip Plcc Protection Pliers Bios Circuit Board Extractor Removal Machine Repair Clip Picker Hand Tool - Buy Plcc Protection Pliers,Bios Circuit Board Extractor,Circuit Board Extractor Product on Alibaba.com been using it for 5 years

First eeprom I removed was a actually on a 4140. I remember I was excited because I finally get an excuse to use a ROM REMOVAL TOOL on a cheap tech kit, that I had for YEARS.
Looked like this:

https://www.aliexpress.us/item/3256805294960502.html?spm=a2g0o.productlist.main.7.36fd12da7kIi33&algo_pvid=5c2932ec-3fb1-4845-8815-ef04eea0a52d&aem_p4p_detail=202311140854577598572369860400004817865&algo_exp_id=5c2932ec-3fb1-4845-8815-ef04eea0a52d-3&pdp_npi=4%40dis%21USD%210.57%210.45%21%21%210.57%21%21%402101f49516999808977567670ef8b7%2112000033255855871%21sea%21US%210%21AB&curPageLogUid=FLHLpIhaPzBE&search_p4p_id=202311140854577598572369860400004817865_4

Worked like ass, wound up using a flathead and spring tool.

But yeah, I agree, those pins are bent so easily. And it's a hassle to get a replacement from SHARP.

[driving lots of miles]

Re: Sharp Mx4071 slow to boot and run

Final solution was the new msata card the SCN MFP PWB, and new HDD.
We are returning the machine tomorrow.