Shar AR-205

[DINGO]

Hy
Y have a ar-205 in a costumer , thats today give me a issue that i never see in this digital copiers, only see something like in a sharp sf 2218 analogy copier that is whwn the mirrors 3 and 4 not are in a corretc position, and the copy are a litle enlarged and blurred??
Can somebody give me same idea??
Y have a lote of 160, 161,201,206 etc and never see this issue.
thanks in advance

[johnbla]

From the document feeder or from the glass ???

[DINGO]

re

hy
in the two modes.
thanks

[mtech]

So exactly what is the issue?

[DINGO]

re

the issue is the copy that are little enlarged and blurred.
thanks.

[davistech]

Check the copy ratio.
Are they being enlarged by the software on the machine and printed on the correct size of paper?
If the copier is enlarging the print and putting it on the original size of paper, this can cause distortion.

[igi]

hi there
if you do self print 64-01 does thath looks ok
if the copier got electronic sorting kit installed could be faulty.
good luck

[china]

I have this service manual from sharp.I can send to you a copy of pdf.
My E-mail:itech@vip.qq.com

[oldrn]

We had an LSU lens come loose that caused blurry copies in this series.

[DINGO]

re

Hy
thanks china, but y just have it, and y think like oldrn said, the issue must be in lsu unit because the copy seems like in the olders anlogic copiers SF-2218 when the mirrors 3 and 4 are out of position.
thanks for help

[DINGO]