Hello,
We have an MX-M754 who's printing a ligt grey band on the back of the pages after we do a calibration, or the machine calibrates itself.
If we do a 44-2, it appears. But strangely only on the back of the pages.
Also, the grey band appears on the same spot as the sensor that does the 44-2 calibration.
Its like the transferbelt doesnt get cleaned.
We swapped the following:
-drum + corona
-transferbelt
-complete drumunit
-developer
-fuser
5.jpg1.jpg
We have an MX-M754 who's printing a ligt grey band on the back of the pages after we do a calibration, or the machine calibrates itself.
If we do a 44-2, it appears. But strangely only on the back of the pages.
Also, the grey band appears on the same spot as the sensor that does the 44-2 calibration.
Its like the transferbelt doesnt get cleaned.
We swapped the following:
-drum + corona
-transferbelt
-complete drumunit
-developer
-fuser
5.jpg1.jpg