AR-c260p :: Code FK?

[discontained]

Hello, I been working on a machine for a few days now, it keeps throwing a L4-07 code, and after u get that problem solved it says Call for service CODE:FK >>> anyone know what this is? Fuser kit maybe?

[johnbla]

FK is the Fuser Maintenance cycle and the L4-07 the the PTB motor lock.......

Check/clean the cleaner blade and auger, then polish/dust the belt and ensure that it moves freely.

[discontained]

ok, I got the L4-07 to disappear after cleaning the transfer belt, and the blade and empting the waste toner. Some reason in my service manual, there is not FK documents... I cannot clear it.

Thanks for your quick response! How would I go about clearing the FK code?

I have talked to sharp, and they didnt even know what a FK code was

[ZOOTECH]

"Some reason in my service manual, there is not FK documents... I cannot clear it."

In my service manual on page 10-9, it explains as Owl mentions, a fuser kit is needed. It also explains how to clear counter.

[discontained]

yea Its a brand new fuser, i actually found it under sim 24-4 fuser clear... Thanks!

[ZOOTECH]

"Some reason in my service manual, there is not FK documents... I cannot clear it."

In my service manual on page 10-9, it explains as Johnbla mentions, a fuser kit is needed. It also explains how to clear counter.