Sharp MX6201N

[Oldslap]

Has anyone had intermittent E706 appearing. Aparrantly one of the DIMMs has been replaced already.
I have loaded latest firmware and ensured that all DIMMs are in the correct slots and seated correctly.

[OMD-227]

E7-05 and/or E7-06 on a Venus series machine is a faulty 1Gb Memory module on the MFP.
Replace it.

[Oldslap]

I have fitted a 1gb DIMM & the fault returned. I have now fitted a new main controller and HD as advised by Sharp.

[NorsemanNE]

I have the same issue on a MX-4501. I have replaced the MFP PWB, all memory, HDD, and now the DC PWB and I am still haveing an issue. Oh, and I have flashed the machine every time I replaced a part.

[ovid]

Re: Sharp MX6201N

I went on a call for E7-06 today on a Sharp MX6201N. Power cycled the machine and it went away. I hate to start replacing part by guessing. Has anyone seen this issue recently? Or know a solution?

Thanks in advance