sharp ar 407

[practical learning]

I need to calibrate the developer for sharp ar407. Can someone please send step by step instructions

[Guest]

ar407

program,interupt,clear,interupt to get in servide mode. Run 25-2 after replacing developer and run 24-5 to reset the dev. count.

[DINGO]

re

HY
The developer was calibrate automatically whith the s.m. 25-2 and execute.

good look

[star38]

I need to calibrate the developer for sharp ar407. Can someone please send step by step instructions

In the control panel press:
- P(Program) I(Interuption) C (Clear) I(Interuption)

- Enter Sim code 25 Sub code 2 (with new developer)

- Press Print Switch ( Adjustment taking place)

Clear developer counter by entering Sim 24 sub5

ADJUSTMENT OVER

Thanks.

[star38]

In the control panel press:
- P(Program) I(Interuption) C (Clear) I(Interuption)

- Enter Sim code 25 Sub code 2 (with new developer)

- Press Print Switch ( Adjustment taking place)

Clear developer counter by entering Sim 24 sub5

ADJUSTMENT OVER

Thanks.