Sharp AR206

[Guest]

I have a fax on an ar206 and it is set to German how do you change it to English. This only happens when in fax mode print mode is in English.

Thanks for any help,

Regards,

Mark.

[bilyahn]

This uses the ARFX2 fax option. I looked at the operator guide but couldn't find a language change but the ARFX3 has on. If you choose the fax mode and then functions you can move around and look for the settings change.

You can select language of display and reports. To do this, follow the procedure below:

Step Press these keys Comments

1

2

3

Press the or keys to scroll the
languages.

4

Press ENTER to select language.

5 Press the STOP key twice to exit.

This is from the FX3 operator's guide.

You can find the operators guides at sharp.ca. They have a very comprehensive list of operator's guides.

I hope this is helpful. Good luck.

Bil

[lky1978]

simulation 26-22 put to 1 for english