Sharp ARM350 with ARNC5J interface; lost passwords need recovery

[Guest]

I inherited an ARM350 with the ARNC5J NIC but am unable to change the NIC IP addr to our new range as the old password has been lost. Is there a way to recover it or reset the system to a default password? For that matter, what is the default password for this system?

[boomer400]

NM, I found it (at least for the Web Admin interface) - admin / Sharp. Next, have to find a Service Manual.

[OMD-227]

The current admin password can be found in sim 22-07. This will allow you to log in as admin to change NIC settings etc etc.

[DINGO]

re

Hi

Try with " 0 " in all spaces, that is a default password.

[DINGO]

I refer to the password acess at the panel of mfp, where you can easy change the ip adress.