Sharp ARM355 dv replace service mode code

[copierpro]

Don't sell many Sharp have an ARM355 do I need to go into service mode to initialize DV like the older machines? Any help on entering service mode and CROP number appreciated. I seem to recall it was 25 on the dv.

[ZOOTECH]

# - * - C - * should get you into Test Commands; it is TC 25-2 to set toner level, do a CA when completed, and clear DV count with TC 24-5.

[OMD-227]

Dont forget the DV rotation counter reset in 24-11 as well. You can get over-toning issues if you dont reset 24-11 as well as 24-05.

[ZOOTECH]

"Brain Fart" - of course TC 24-11 is needed, thanks Wazza for keeping watch over us.