I have a MX-M6200 (sharp) when printing from the pc the picture or document is overpowered by yellow. The machine copies are perfect as well as the internal test patterns. The MFP, PCU, LSU, HDD the memory, the primary transfer as well as the Yellow dv unit has been replaced. Sharp is out of answers. Hopefully someone here will have seen the issue or be able to poit me in another direction. Thanks in advanced.
-
-
There is no way that Sharp is out of answers for you. There is also no way that replacing the HDD, MFP or memory would have fixed this either.
Firstly, have you done a full color calibration? Calibrating the engine & scanner are 2 different processes.
Have you cleaned the ID sensor & run the calibration jig?
Is the firmware up to date, Are you running the latest drivers (and correct drivers)?
What are the color drum counters up to?
If internal 64-01 & 64-05 prints are good, and copies are good, then I really believe this is more of a calibration or driver issue than anything else.
Run 44-06, 44-26, 46-24 & 67-24 and get back to us.Comment
-
The calibrations have been done from start to finish by the bulliten. The print driver is ruled out by printing directly from the web interface and printing from USB. The ID sensor and adjustment has been done as well. Drum counters are less than 25k and firmware is up to date.Comment
-
Maybe try to do a auto color calibration (system setting, log in as admin, printer setting, auto color calib.)Comment
-
Read Wazza's post again. There is only ONE printer. If copies are fine, and internal prints are fine, it is your print driver.
You say you did the calibration per TB - now do them (all of them) in the order he said (remember each calibration is done multiple times) - and I suggest you use the Factory Settings.
When I have issues like this I keep reminding myself there is but 1 printer - ignore all common points between print and copy, then double check what is left.Comment
Comment