If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Force Imagistics IM3511 to Accept Sharp Toner & Toner Chips
[Misc]
Force Imagistics IM3511 to Accept Sharp Toner & Toner Chips
Does anyone know or have ANY ideas on how to force an Imagistics IM3511 (basically a SHARP AR-M355N) to accept and use sharp toners and SHARP toner chips? Thank you in advance!
It does not matter how slowly you go as long as you do not stop. –Confucius
Re: Force Imagistics IM3511 to Accept Sharp Toner & Toner Chips
Originally posted by MFPs R Now PCs
Does anyone know or have ANY ideas on how to force an Imagistics IM3511 (basically a SHARP AR-M355N) to accept and use sharp toners and SHARP toner chips? Thank you in advance!
only one way, flash to sharp firmware and also change to the arm455 dv unit
It does not matter how slowly you go as long as you do not stop. –Confucius
Comment