AR 407

[snowy]

Having AR 407 with NIC ARPB2a , I connected it to my switch and defined an IP address in the network settings in the printer.

It prints but the transmission of the file (size 60 MB) from the computer to the printer is too slaw, it takes 30 min to start printing.

The port is defined as TCP/IP protocol LPR port number 515.

Is there any way to make the data transmission from the PC to the printer faster?

[snowy]

Having AR 407 with NIC ARPB2a , I connected it to my switch and defined an IP address in the network settings in the printer.

It prints but the transmission of the file (size 60 MB) from the computer to the printer is too slaw, it takes 30 min to start printing.

The port is defined as TCP/IP protocol LPR port number 515.

Is there any way to make the data transmission from the PC to the printer faster?

Any reply will be much appreciated

[shannon09]

60mb is pretty big for a pb2a, might be pushing its limits, is the memory maxxed out?

[shannon09]

i also recall from my sharp days, that we set these up lpr, with a queue name of print, and byte counting off

[DINGO]