Before I make a wasted trip to the customer, I was hoping someone might know if the dv units are interchangeable. Thanks!
IM-4511/AR-M355 developer units compatible?
Collapse
X
-
Re: IM-4511/AR-M355 developer units compatible?
I am not sure if it is compatible or not
however just swap out the dv sensor chip and make sure the connector on the back looks the same if it isnt swap it off and it will work. Do this a lot with ARM237 series and ARM450/455'sComment
-
Re: IM-4511/AR-M355 developer units compatible?
Heading out to the customer tomorrow with the new dv unit, Ilky. Just want to make sure. I just add new developer and calibrate and then I'm good to go? Thanks again.Comment
-
Re: IM-4511/AR-M355 developer units compatible?
fyi, dv unit with part no.CBOX-0125DS51 compatible with
SHARP MODEL: AR-M280, AR-M300, AR-M350, AR-M450
AND OCE IMAGISTIC MODEL:IM3510,IM4510,IM3511,IM4511,IM3512, IM4512
YES.just put new developer and run sim25-02.have a nice dayComment
-
Re: IM-4511/AR-M355 developer units compatible?
Hey, Iky,
I find your post very interesting. My case is this: My customer has IM-3512 which is supposed to be the same as Sharp MX-M350N. I bought the DV-unit for the MX-M350N (part #CBOX 0125DS60) and it fits but is NOT recognized by the IM-3512. I still get the message "Insert Developer". What can I do?
Thanks in advance.
BillComment
-
Re: IM-4511/AR-M355 developer units compatible?
lky1978
Sen
Iky1978, Thank you. I ordered the right unit this time and worked right away. The customer is happy and so am I.
Bill.Comment
-
FMW
Re: IM-4511/AR-M355 developer units compatible?
Iky:
You are obviously very familiar with the IM-4511, and I am having some trouble with mine. My document feeder pulls in the first document and it jams before the document makes it to the glass. When I pull it out it looks like it has been folded for a hand fan. Any suggestions on how to fix this?
FMWComment
-
Re: IM-4511/AR-M355 developer units compatible?
Just the usual stuff. Check for a jammed staple, or piece of paper. (Remove the white, metal paper guide covering the upper LED bar and look in there.) Make sure sensors are clean. Feed rollers. Clean clutches.Comment
-
FMW
Re: IM-4511/AR-M355 developer units compatible?
Thanks! Thaat was it. There was some of that clear gummy adheasive that is sometimes used on papers stuck on it. Works perfectly now.
FMWComment
-
syswin76
Re: IM-4511/AR-M355 developer units compatible?
lky ... wanna ask were can i buy the packet toner for the Oce Im4512 refilll ...
u got sell if got ....... i wanna buy from u ...
kindly email to huishan76@yahoo.com
ThanxComment
Comment