F1-09

[Tonermonkey 2.0]

Does anyone have a fix for this code on the MXM 550 series?

[djv]

Re: F1-09

Hi

f1-09 is a finisher load capacity sensor error

1 clean sensors check sim 3-2 for sensor operation

2 check harness connection

3 inspect sensor for damage replace if necessary

4 finisher control pwb, replace board if all else fails above

I myself have had this issue and it was corrected when damaged sensor was replaced

[Tonermonkey 2.0]

Re: F1-09

Hi

f1-09 is a finisher load capacity sensor error

1 clean sensors check sim 3-2 for sensor operation

2 check harness connection

3 inspect sensor for damage replace if necessary

4 finisher control pwb, replace board if all else fails above

I myself have had this issue and it was corrected when damaged sensor was replaced

which sensor did you replace?

thanks for the help

[JustManuals]

Re: F1-09

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[djv]

Re: F1-09

hi buddy

there is a tech bulletin on this matter also pm me your email and i will foward to you.