Re referencing colour developer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chr15tophe
    Technician
    • Dec 2011
    • 42
    #1

    Re referencing colour developer

    On the MX-2600N the colour developer and drums are rated for 60k but the mono is rated at 100k, if we were to push the colour consumables to 100k what are you thoughts on, resetting the colour developer then running crop code 25-2 ?

    taking process control into consideration would it be better to leave the developer alone or re reference the developer.

    Our thinking is to leave the developer alone and not run 25-2 but to reset the developer lights and run a full CQ Setup.


    Thoughts comments appreciatd...
    Tags: None
    • mojorolla
      The Wolf

      2,500+ Posts
      • Jan 2010
      • 2583
      #2
      Re: Re referencing colour developer

      You can set the maintenance interval in SIM 21-1. Set it to the desired interval for color, in this case 100k. DO NOT run 25-2 with old developer material. You would be better served hitting yourself in the face with a hammer.

      Failing to plan is planning to fail!!!

        Comment

        • Chr15tophe
          Technician
          • Dec 2011
          • 42
          #3
          Re: Re referencing colour developer

          Yes you can set the CA pm lights to come on at 100k but developer lights will still come on at 60k displaying VC VM VY.

            Comment

            Previous template Next
            Working...