SF2116

[CorkyShark]

I am working on a SF2116 with light copies. I replaced the drum, blade and developer. The copies are a little lighter now before the replacement. I did the developer initialization. The corona wires are good. Any information would be appreciated.

[ZOOTECH]

Re: SF2116

I am working on a SF2116 with light copies. I replaced the drum, blade and developer. The copies are a little lighter now before the replacement. I did the developer initialization. The corona wires are good. Any information would be appreciated.

Did you do any exposure adjustments in the test Commands? Is the copier in toner save mode?

[CorkyShark]

Re: SF2116

No to both questions.

[ZOOTECH]

Re: SF2116

No to both questions.

Test command 46-01 will adjust exposure. If your adjustments are good in the test commands, but are off in regular copying, you probably are in user set toner save mode.

[CorkyShark]

Re: SF2116

Thank you for the quick response. I will try that and let you know. Thanks

[JustManuals]

Re: SF2116

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[oldrn]

Re: SF2116

Did you clean the mirrors under the black metal dark box cover ? I realize in analog that dirty optics usually makes for darker copies but might be worth looking at.

[DINGO]

Re: SF2116

Did you clean the mirrors under the black metal dark box cover ? I realize in analog that dirty optics usually makes for darker copies but might be worth looking at.

.

be careful, when clean this mirrors, do not move by hands, first put the mirrors in the enlarge mode, for you can get space clean easy this mirrors.

if you try move them by hands, the mirrors can desajust easy.

good look

[BMSInc95]

Re: SF2116

Yes, enlarge to 200% then turn off copier. clean 5 mirrors. turn on and adjust sim. 46-01

[CorkyShark]

Re: SF2116

I did clean optics and under black cover when I did the drum replacement and developer. I went back today and I did test command 46-01. Copies are darker now, thank you very much.

[oldrn]

Re: SF2116

The copies are a little lighter now before the replacement.

Good advice from Zootech. I should have thought a little longer before posting. My penalty for that is a phone call I just took for service on one of these