MX-M363N scanning

[Guest]

Wondering if anyone out there knows of a way to set up scanning for Apple computers. I once had a setp by step procedure, but misplaced it. Thank in advance. Ron

[DavePo]

Re: MX-M363N scanning

Check IDNC there is a bulletin on setting up scan to FTP on MAC's.

[bilyahn]

Re: MX-M363N scanning

Pretty easy once you figure out which machine name that it uses. Are you putting it on X 10.6 or an older unit? There are differences depending on the operating system. Here is a short list of things to do or at least look at. I didn't use all of them but most of them are correct for 10.6.

Good luck!

Bil

Printing Scanning MAC[1].pdf

[LOC]

Re: MX-M363N scanning

Wondering if anyone out there knows of a way to set up scanning for Apple computers. I once had a setp by step procedure, but misplaced it. Thank in advance. Ron

See the following:

Setting Up Sharp MFPs to Scan to FTP on MACs

Setting up scan to network folder on Sharp MX Imagers to Macs.

[ledoux]

Re: MX-M363N scanning

Wondering if anyone out there knows of a way to set up scanning for Apple computers. I once had a setp by step procedure, but misplaced it. Thank in advance. Ron

If they are running OSX 10.7 or above it's a booger. I haven't been able to get it to work although if you google it there are some people saying they can get it to work. A client of mine had to use a third party software to get it to work called Dave. If it's 10.6 snow leopard or below you're golden with the info above.