MX-4112 job build interrupt

[sharphead]

Not sure if this was possible but was asked by a customer about this today so here goes.

The customer wants to know is it possible to add an interrupt function when she is using the job build function for example she has scanned 50 pages but has another 20 to go someone urgently needs one page she interrupts her job build they do their one page and she only has to finish her 20 not start from scratch.

Any ideas

[bilyahn]

Re: MX-4112 job build interrupt

Good question! I'm pretty sure you can not do this but will have to try it at the shop to be 100% sure. Interrupt only shows up when machine starts doing copies or prints!

Good luck.

Bil