Intermitting E7-14. Replaced ccd and Scanner control PCB.
MX-M453N Error E7-14
Collapse
X
-
Tags: None
-
Re: MX-M453N Error E7-14
Did you replace the flat CCD cable as well? If you put a new style CCD and scanner pwb in, the cable should be silver. If it is white with blue lettering, it is the old style and is likely the cause of the error. There is a bulletin regarding this as well.
Failing to plan is planning to fail!!! -
Re: MX-M453N Error E7-14
mojo , i am know this is an old post. can you send me the bulletin regarding this issue?
my email: lky1978@yahoo.com
tqComment
Comment