MX3100N 44-26 error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dustin(WOP)
    Trusted Tech

    100+ Posts
    • Apr 2009
    • 223
    #1

    MX3100N 44-26 error

    Got a weird one guys,
    Co-Worker of mine was working on an MX3100N that is over toning magenta. He ran 44-26 and gets an error M. Customer says the problem started right after replacing Magenta toner cart. Has anyone ever seen this or have any ideas? I know he has swapped the drums between colors and replace the transfer unit. Thanks in advance!
    Tags: None
    • DAKOTADAN
      Technician

      50+ Posts
      • Jan 2011
      • 61
      #2
      Re: MX3100N 44-26 error

      Originally posted by Dustin(WOP)
      Got a weird one guys,
      Co-Worker of mine was working on an MX3100N that is over toning magenta. He ran 44-26 and gets an error M. Customer says the problem started right after replacing Magenta toner cart. Has anyone ever seen this or have any ideas? I know he has swapped the drums between colors and replace the transfer unit. Thanks in advance!

      Dustin, take a look at TT-13944, it says to run 67-24 to bing the half tone correction to a acceptable level, then run 44-26. This worked for me once, when I got that error.
      Good luck, Dan.

        Comment

        • gwaddle
          Senior Tech

          500+ Posts
          • May 2009
          • 782
          #3
          Re: MX3100N 44-26 error

          Originally posted by DAKOTADAN
          Dustin, take a look at TT-13944, it says to run 67-24 to bing the half tone correction to a acceptable level, then run 44-26. This worked for me once, when I got that error.
          Good luck, Dan.
          Thanks Dan
          I know I should be ashamed of myself. Strangely though, I am not.

            Comment

            • gwaddle
              Senior Tech

              500+ Posts
              • May 2009
              • 782
              #4
              Re: MX3100N 44-26 error

              Ok I've still got the error m when I run 44-26. I've tried everything everybody said with no effect. All the service manual says is "High density process control error" Not a big help. Any other suggestions or a translation of what the service manual says? Thanks.
              I know I should be ashamed of myself. Strangely though, I am not.

                Comment

                • Akitu
                  Legendary Frost Spec Tech

                  Site Contributor
                  2,500+ Posts
                  • Oct 2010
                  • 2595
                  #5
                  Re: MX3100N 44-26 error

                  Originally posted by gwaddle
                  Ok I've still got the error m when I run 44-26. I've tried everything everybody said with no effect. All the service manual says is "High density process control error" Not a big help. Any other suggestions or a translation of what the service manual says? Thanks.
                  Longshot, but check your main drive gear of the primary transfer belt. The ol' ace in the hole of any MX colour machine... That gear breaking will do ANYTHING. If it can't move the patches on the belt correctly, it'll give an error.

                  Haven't had this error specifically so not much more I can contribute other than that. Perhaps check your toner transfer pipes in the back of the machine as well?
                  Cthulhu for president! Why settle for the lesser evil?

                    Comment

                    • gwaddle
                      Senior Tech

                      500+ Posts
                      • May 2009
                      • 782
                      #6
                      Re: MX3100N 44-26 error

                      Originally posted by Akitu
                      Longshot, but check your main drive gear of the primary transfer belt. The ol' ace in the hole of any MX colour machine... That gear breaking will do ANYTHING. If it can't move the patches on the belt correctly, it'll give an error.

                      Haven't had this error specifically so not much more I can contribute other than that. Perhaps check your toner transfer pipes in the back of the machine as well?
                      Good thought. I checked the gear first thing and even changed the transfer unit. You're right though, that gear can cause anything. Thanks
                      I know I should be ashamed of myself. Strangely though, I am not.

                        Comment

                        • mojorolla
                          The Wolf

                          2,500+ Posts
                          • Jan 2010
                          • 2583
                          #7
                          Re: MX3100N 44-26 error

                          Run 44-27 first to clear out the previous setup, then run 44-26. You may also want to check your procon sensor or sensor cover is not dirty.


                          Failing to plan is planning to fail!!!

                            Comment

                            • gwaddle
                              Senior Tech

                              500+ Posts
                              • May 2009
                              • 782
                              #8
                              Re: MX3100N 44-26 error

                              Originally posted by mojorolla
                              Run 44-27 first to clear out the previous setup, then run 44-26. You may also want to check your procon sensor or sensor cover is not dirty.


                              Thanks. Somebody else told us this morning to do that and it fixed it. Thanks for the help.
                              I know I should be ashamed of myself. Strangely though, I am not.

                                Comment

                                Previous template Next
                                Working...