If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
customer punched the display of the arm 550 and i need to replace it but sharp canada doesn't seem to have it stock is it possible to fit a display of a arm 350 on a arm 550
The parts manual says that both machines use the same LCD module. The touch screens have different parts numbers but a check with sharp parts shows both numbers were replaced with the same new touch panel. Looks it should work.
Comment