ARM550 Intermittent lift on the #2 tray

[Buddy]

Hi all,
Like all of the other AR issues I've had with cassettes lifting, I replaced the lift motor. Unfortunately, it's not working on this machine. I keep getting an F3-22 code. Just wondering if anyone has seen this before I start replacing sensors and boards. Thanks

[igi]

Re: ARM550 Intermittent lift on the #2 tray

hi did you reset Sim -15

[Buddy]

Re: ARM550 Intermittent lift on the #2 tray

Yes I did, but the code keeps coming back.

[JustManuals]

Re: ARM550 Intermittent lift on the #2 tray

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Buddy]

Hey, thanks again spam douche for wasting my time. I get my manuals from servicemanuals.net

[sharptech1]

Re: ARM550 Intermittent lift on the #2 tray

Did you look behind the tray for a piece of paper near the lift motor?

[Buddy]

Re: ARM550 Intermittent lift on the #2 tray

Yup, had the tray out and carefully inspected it.

[sharptech1]

Re: ARM550 Intermittent lift on the #2 tray

I am sure you inpectected the rear of the machine, especially the the lift gear next to the rear of the tray as it slided in. If so, I don't think I can help you.