Surprise, Surprise MXFN10 problem

[harps05]

Hi Guys, Client has a MX2600 with a MXFN10. Constant jamming due to, what seems like, the misalignment of the staples in the unit. Has anyone came across this before. At the moment I'm thinking general wear and tear as the client prints a lot of booklets. Just wondering if anyone had a solution before I by a new staple unit. Thanks Guys

[mojorolla]

Re: Surprise, Surprise MXFN10 problem

I would look at the plastic reusable cartridge as the possible cause.