Sharp AR m237 setting up scanner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kmtech
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2008
    • 125
    #1

    Sharp AR m237 setting up scanner

    Hi to All, I am going out to setup a scanner on this machine and not sure is it has web interface. can anyone help? i just picked this customer up and things are a bit tight out here so i told them i would. I am fairly up to date on networks and such. Thanks in advance.
    Bill
    Tags: None
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Re: Sharp AR m237 setting up scanner

      Originally posted by kmtech
      Hi to All, I am going out to setup a scanner on this machine and not sure is it has web interface. can anyone help? i just picked this customer up and things are a bit tight out here so i told them i would. I am fairly up to date on networks and such. Thanks in advance.
      Bill
      As long as it is on the network you can access web interface via the copier's IP address.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • kmtech
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2008
          • 125
          #3
          Re: Sharp AR m237 setting up scanner

          Originally posted by ZOOTECH
          As long as it is on the network you can access web interface via the copier's IP address.
          is it obvious where the IP is, are the setting straight forward?

            Comment

            • Akitu
              Legendary Frost Spec Tech

              Site Contributor
              2,500+ Posts
              • Oct 2010
              • 2595
              #4
              Re: Sharp AR m237 setting up scanner

              IP settings are somewhat hidden on this series. Newer models have "Network settings" right in the custom settings menu... These ones however, need to be accessed through "Printer settings" followed by "Interface settings".

              The settings are decently labeled in the machine and not terribly hidden. If I recall correctly (it's been a while since I was on the web interface for a 237), the network settings should be labeled as such. This copier does not and can not support SSL, so that rules out a fair chunk of ISPs after they've started blocking public access port 25 mail servers. Much to my dismay I've found Sharpdesk to be a superior option to the web interface settings when dealing with the ARM machines - not to say it can't be done...
              Cthulhu for president! Why settle for the lesser evil?

                Comment

                • kmtech
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • Sep 2008
                  • 125
                  #5
                  Re: Sharp AR m237 setting up scanner

                  Thanks Akitu, so its under the print button, thanks a great deal...
                  Bill

                    Comment

                    Previous template Next
                    Working...