Wireless

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • muthuk7
    Technician

    50+ Posts
    • Aug 2010
    • 57
    #1

    [Misc] Wireless

    Dear Doctors,

    Have a merry Christmas

    I have an issue with MX-C300W , would highly appreciate if could you please assist me how to connect the MFP through WIFI(wireless). What are all the settings has to be changed. Looking forward your soonest reply.

    Regards
    S.M
    Tags: None
    • Akitu
      Legendary Frost Spec Tech

      Site Contributor
      2,500+ Posts
      • Oct 2010
      • 2595
      #2
      Re: Wireless

      That's a very, very new machine. I have my doubts very many of us have experience with it.

      I'm eagerly awaiting getting my hands on one so I can kill some troublesome HPs.
      Cthulhu for president! Why settle for the lesser evil?

        Comment

        • bilyahn
          Service Manager

          1,000+ Posts
          • Dec 2006
          • 1470
          #3
          Re: Wireless

          Interesting, can only find the wireless LAN setup for the color series. Should be pretty much the same. As with any wireless I would make sure you have the highest signal strength that you can get to limit the number of problems you will have: Note I didn't say eliminate just reduce!! LOL

          Good luck

          Bil
          Attached Files

            Comment

            • ruben
              The New Guy

              1,000+ Posts
              • Oct 2012
              • 1203
              #4
              Re: Wireless

              I would only recommend using wireless if you are using it for ad-hoc printing, while still having a wired setup. E.g. admin office for wired, contractors for wireless.

              (If the device has two seperate NICs)

                Comment

                Previous template Next
                Working...