Sharp mx-2600n replace develop unit (m) (c) s

[ivanusicnm@gmail.com]

Heelo

a have a problem with sharp mx-2600n. When i turn on machine appers replace develop unit (m), (c). I tried develop unit on the other machine and works normaly. Then i tried to put develop unit from other machine, same problem. Put a new developer but no change.

Any suggestion??????

[ZOOTECH]

Re: Sharp mx-2600n replace develop unit (m) (c) s

[QUOTE=ivanusicnm@gmail.com;407539]Heelo

a have a problem with sharp mx-2600n. When i turn on machine appers replace develop unit (m), (c). I tried develop unit on the other machine and works normaly. Then i tried to put develop unit from other machine, same problem. Put a new developer but no change.

Any suggestion??????[/QUOTE

After running TC25-2, did you clear the dv counters? (usually, you would replace all the color dv at one time)

[ivanusicnm@gmail.com]

Re: Sharp mx-2600n replace develop unit (m) (c) s

[QUOTE=ZOOTECH;407547]

Heelo

a have a problem with sharp mx-2600n. When i turn on machine appers replace develop unit (m), (c). I tried develop unit on the other machine and works normaly. Then i tried to put develop unit from other machine, same problem. Put a new developer but no change.

Any suggestion??????[/QUOTE

After running TC25-2, did you clear the dv counters? (usually, you would replace all the color dv at one time)

did you mean SIM 24-5? yes i did this simulation. fuuny is that, machine work normaly, then i replace develop unit from mx-2600 to mx4100. mx4100 work normaly, but mx2600 appers "replace develop unit". then i put the unit which was in mx4100 back to mx2600 and still appers replace develop unit.