DX-C400

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mmechura
    Technician
    • May 2008
    • 43

    #1

    DX-C400

    Checking to see if any one of you would be so kind as to provide me with any updated firmware that may be available for the DX-C400 current levels are:
    ICU - Main 01.03.F0
    ICU - Boot 01.00.F1
    Lang - 01.00.F0
    Graphic - 01.00.F1
    Img Data ROM - 01.00.F0
    PCU - 01.04.F0
    SCU - 01.01.F0
    Fax1 Main - 01.01.P2
    Desk - 01.01.F0
    Finisher - 01.03.F0
    NIC - 01.05.00
    Power-Con - 01.00.P2
    E-Manual - 01.30.F1
    ESCP - 04.00.00
    PDL - 01.00.00

    Your help and the ensuing instructions for the firmware upgrade are appreciated in advance, thanks
  • Akitu
    Legendary Frost Spec Tech

    Site Contributor
    2,500+ Posts
    • Oct 2010
    • 2595

    #2
    Re: DX-C400

    Originally posted by mmechura
    Checking to see if any one of you would be so kind as to provide me with any updated firmware that may be available for the DX-C400 current levels are:
    ICU - Main 01.03.F0
    ICU - Boot 01.00.F1
    Lang - 01.00.F0
    Graphic - 01.00.F1
    Img Data ROM - 01.00.F0
    PCU - 01.04.F0
    SCU - 01.01.F0
    Fax1 Main - 01.01.P2
    Desk - 01.01.F0
    Finisher - 01.03.F0
    NIC - 01.05.00
    Power-Con - 01.00.P2
    E-Manual - 01.30.F1
    ESCP - 04.00.00
    PDL - 01.00.00

    Your help and the ensuing instructions for the firmware upgrade are appreciated in advance, thanks
    Good luck, this is probably the worst place to be asking for firmware as it is monitored by Sharp.
    Cthulhu for president! Why settle for the lesser evil?

    Comment

    • mmechura
      Technician
      • May 2008
      • 43

      #3
      Re: DX-C400

      Thanks for the heads up. Can you please tell me by my post if I am anywhere near current.

      Comment

      • Akitu
        Legendary Frost Spec Tech

        Site Contributor
        2,500+ Posts
        • Oct 2010
        • 2595

        #4
        Re: DX-C400

        My Sharp support site only lists Canadian models, which the DXC400 is not.
        Cthulhu for president! Why settle for the lesser evil?

        Comment

        • ZOOTECH
          Senior member of CRS

          Site Contributor
          2,500+ Posts
          • Jul 2007
          • 3375

          #5
          Re: DX-C400

          Originally posted by mmechura
          thanks for the heads up. Can you please tell me by my post if i am anywhere near current.
          icu main 03.03.f0
          icu boot 01.02.f1
          desk 01.01.f0
          finisher 01.03.f0
          pcu 01.10.f0
          scu 01.02.f0
          fax 01.03.p2
          "You can't trust your eyes, if your mind is out of focus" --

          Comment

          Working...