how to make black and colors darker and more dense mx-5001n- mx7001n

[ohightower]

Im trying to figure out how to make blacks more dense and fuller I preformed full calibrations and when I run test copies the black Is alittle faded how to I make this more dense.

[harleyrider]

Re: how to make black and colors darker and more dense mx-5001n- mx7001n

A simple fix for me is set the exposure default to text. It will fill better.

[ohightower]

Re: how to make black and colors darker and more dense mx-5001n- mx7001n

A simple fix for me is set the exposure default to text. It will fill better.

Thanks Ill try it tomorrow morning

[oeshuron]

Re: how to make black and colors darker and more dense mx-5001n- mx7001n

Sim 46-19 still set to mode 1?

How many copies on developers?

[ohightower]

Re: how to make black and colors darker and more dense mx-5001n- mx7001n

Sim 46-19 still set to mode 1?

How many copies on developers?

Yes it set to mode one in not one particular machine i'm just saying in general because I had a few customers ask me to make text darker I was wondering if it was a way to do that without increasing exposer. I found that 10-1 helps outs

[ZOOTECH]

Re: how to make black and colors darker and more dense mx-5001n- mx7001n

Yes it set to mode one in not one particular machine i'm just saying in general because I had a few customers ask me to make text darker I was wondering if it was a way to do that without increasing exposer. I found that 10-1 helps outs

Sure, running the toner (add) motor will temporarily make it better, but you'll soon have lighter fill. There is something else going on, maybe the 25-2 was reading high when new DV was installed, or maybe the toner sensor was dirty when DV was added.