Getting error code C1-10 been stuck on this problem for about 3 months now. I replaced the main charger unit black, I replaced the pcu power board, I have an open ticket with sharp and have talked to them for hours with no help. I did every thing in the service manual. Does any one have any solutions. Thanks!
-
-
Re: C1-10 sharp mx-5001n
check cn1 pin 1 from mc pwb to cn 6 pin 17 for continuity with your meter. if that checks out the wiring from mc pwb to pcu is good. then the issues lies between the mc bk unit and mc pwb, contacts for the charge unit or wire from charge unit contact to mc pwb.
'
check sharp tech site for bulletins , I think there was something about charge unit connector/contacts plastic housing for this series 2600-5001.
Comment